• Casters and Wheels

    • Light-Duty Casters
    • Light Medium Casters
    • Medium-Duty Casters
    • General-Duty Casters
    • Made of hardened STEEL for toughness.
    • FOB Shipping Point

  • Economy Light Medium Casters

    • Ideal for food service, hospital equipment, laundries, dairies, furniture, appliances, electronic cabinets and more.
    Features 2 ball bearing swivel raceways and ball bearings in wheels also. Made of cold rolled steel and embossed for added strength - handles loads from 100 - 1000 lbs. Complete with protective plastic thread guards. 3/8" axles. Zinc plated. Rigid caster is solid, riveted construction, embossed for added strength. Type "TPR" is Durakush thermoplastic (soft) elastomer wheel. Type "Poly" is Miratek polyurethane (harder) wheel. Top plate size: 2-5/8" W. x 3-3/4" L. Bolt hole spacing: 1-3/4" x 2-3/4-3". 5/16" bolt hole size. FOB Shipping Point.

  • Floor Locks

    • Adaptable to all types of portable equipment.
    • Double pedal will not allow operator to place his foot under the load.
    Large steel disc features non-marking rubber pad for non-slip floor contact. Top plate is 3-3/4" W x 4-5/8" L with bolt hole 2-5/8" W x 3-5/8" L, slotted to 3 x 3". Sturdy steel construction. Electro-plate finish. FOB Shipping Point.

  • Casters

    Casters

    (50)

    • Medium - Heavy Casters
    • Heavier - Duty Casters
    • Heavy - Duty Casters
    • Available in Swivel and Rigid types

  • Polyurethane on Cast Iron Wheels

    • Constructed of abrasive resistant polyurethane 90 Durometer Shore A for high-load capacity.
    • Can be used on virtually any floor surface.
    Not affected by oils, grease and most solvents. 90 Durometer Shore A handles temperatures from -30ºF to 180ºF. Non-marking, non-staining qualities combine with impact, shock and abrasion resistance. Quiet rolling. Roller bearings. FOB Shipping point.

  • Thermoplastic/Rubber Wheels

    • New, high tech wheel that fills a wide range of applications.
    • The modulus rubber tread called thermoplastic rubber with a rating of 65 Shore A, is permanently bonded to an ultra-durable polyolefin core.
    This combination creates a wheel that has high rollability, high impact and abrasion resistance - resist floor debris, low temperature flexibility, quiet operation and will resist going flat under a load. FOB Shipping Point.

  • Polyurethane/Aluminum Wheels

    • Features maximum floor protection and great rollability.
    • Durable polyurethane tread bonded to an aluminum wheel core for long life.
    Features a very high strength-to-weight ratio. Resistant to corrosion, rust, chemicals, solvents and oils. Polyurethane tread is non-marking, non-sparking, abrasive resistant and quiet operation. Temperature range: 45ºF to 180ºF. Durometer hardness 90 Shore A scale. FOB Shipping Point.

  • Semi-Steel Wheels

    • Made from cast iron for high performance, abrasive resistance and long life.
    • Designed with flat (machined) treads.
    In many cases, these wheels will serve where steel or available iron wheels would otherwise be required. FOB Shipping Point.

    Due to current market conditions steel surcharges fluctuate. Please call to confirm current pricing.

  • Hi-Cap Rubber Mold-on/Cast Iron Wheels

    • Higher load capacity of standard rubber mold-on wheels with semi-steel centers.
    Features long service with true abrasion resistance. Made of 90 Durometer hard rubber tread. They start easier with heavy loads with less effort to keep them rolling, while the harder tread reduces heat build-up. Harder surface also reduces embedding of foreign materials from floors. Semi-steel wheel centers with fitting for pressure lubrication. FOB Shipping Point.

  • Phenolic Canvas Wheels

    • Made of macerated canvas impregnated with phenolic resins for high capacity requirements.
    • Rolls easily and protects the floor.
    Resists shock, water and oil. Withstands -50ºF to 250ºF. Roller bearings. FOB Shipping Point.

  • Rubber Mold-on/Cast Iron Wheels

    • Top quality 70 Durometer rubber, vulcanized to semi-steel centers.
    Combines resilience with total wearability, matching and sometimes surpassing synthetic rubbers in grease resistance. Hardened steel roller bearings have hardened steel outer races for longer wear. Wheel centers are semi-steel. FOB Shipping Point.

  • Super Lock Brake Casters

    • Light-medium to heavy-duty casters are made to exacting tolerances from heavy-gauge steel and hardened for durability.
    • Swivel casters feature two perfectly aligned swivel raceways.
    • Super Lock brake locks the wheel and the swivel simultaneously with the touch of the toe - quick release. FOB Shipping Point.

  • Medium Heavy-Duty Casters

    • Rugged cold-forged steel series features two separate and large diameter ball bearing raceways.
    • Includes lubrication fittings.
    • Features two large diameter
    • Ball Bearing Raceways
    Top plate is 1/4" cold forged and measures 4 x 4-1/2". Bolt hole is 2-5/8" x 3 5/8" slotted to 3 x 3". 1/4" upper and lower raceways. 5/16" load balls. 1/4" balls for lower raceway. 5/8" nut and bolt kingpin. Roller bearing. Zinc plated. FOB Shipping Point.

  • Heavy-Duty Dual-Wheel Caster

    • Designed for especially top-heavy loads that require more floor contact.
    • Heavier loads are much easier to swivel, thanks to the differential action that occurs with dual wheels.
    Zinc plated. Choose from three series for the appropriate load required. FOB Shipping Point.

  • "V" Grooved Wheel Casters

    • Accurately machined to fit snugly on angle iron track.
    • Designed for easy use on ordinary floor surfaces.
    Ideal for production systems which operate constantly from station to station allows better use of floor space and avoids cluttered aisles. Nut and bolt axles. Roller bearing, Zinc plated. FOB Shipping Point.